Transporting class 300/700 style of machines

  • Vintagepos
  • Vintagepos's Avatar Topic Author
  • Offline
  • over 80 posts
More
3 years 10 hours ago #353 by Vintagepos
Vintagepos created the topic: Transporting class 300/700 style of machines
When transporting these style of machine be aware that the key coupler inside the machine is sitting free until a key is pressed and locks on to it, which then locks all other keys out until the transaction is completed. When transporting the machine and it is tilted or put on its back the key coupler is free to move and can stop all other keys from being pressed. Ideally it is wise and good practise to press a key whenever one of these machines have to be moved. Please instruct your shipper to do it as this can save faith to both parties.

Please Log in to join the conversation.

More
3 years 3 hours ago #354 by rvkapp1
rvkapp1 replied the topic: Transporting class 300/700 style of machines
I usually just lock the machine with the #2 key during transport.

Please Log in to join the conversation.

  • Vintagepos
  • Vintagepos's Avatar Topic Author
  • Offline
  • over 80 posts
More
2 years 11 months ago #361 by Vintagepos
Vintagepos replied the topic: Transporting class 300/700 style of machines
Locking is best but when you purchase or get someone to deliver a machine and they don't have a key, pressing a key is a good safety measure.

Please Log in to join the conversation.

  • ncrebay
  • ncrebay's Avatar
  • Offline
  • over 160 Posts
  • Antique Cash Register Collector
More
2 years 11 months ago #364 by ncrebay
ncrebay replied the topic: Transporting class 300/700 style of machines
I know, because I had a 50 1/4 cash register as posted in the question about cash registers forum, and it doesn't work. It is frustrating when sellers don't know what they are doing

Antique Cash Register Collector, eBay Seller, Figure Skater, Enjoy Listening To Lounge Music in Spare Time

Please Log in to join the conversation.

Powered by Kunena Forum