file Renaissance Jam on Sale Registration

2 weeks 3 days ago #5729 by magpies35

  • New Member
  • New Member

  • Posts: 7
  • Thank you received:

  • Renaissance Jam on Sale Registration was created by magpies35
    I'm in the process of putting my Renaissance register back together. I pushed the 8 cent key down and 9/10 of the way through, it stopped and did not complete the cycle. Here are three pictures of the resulting key positions and cam position on the counter. I think if I take out the counter, that will clear the jam. If it does, maybe I should just leave it out, or should I put it back in and hope for the best. How hard is it to remove the counter? I would really appreciate the help. Thanks Matt
    Attachments:

    Please Log in to join the conversation.

    2 weeks 3 days ago - 2 weeks 3 days ago #5730 by Lombard Illinois

  • over 40 Posts
  • over 40 Posts

  • Posts: 41
  • Thank you received:

  • Replied by Lombard Illinois on topic Renaissance Jam on Sale Registration
    Hit it harder...... or lift the counter weight up with a thick long screw driver.
    The jump over "U" shaped piece on the right side of chassis is just short of
    clearing...
    You need to spray the hell out of that dirty dusty counter too.
    And if there is a printer on right side spray it too.

    Please Log in to join the conversation.

    1 week 6 days ago #5739 by Dick Witcher

  • over 160 Posts
  • over 160 Posts

  • Posts: 226
  • Thank you received: 41

  • Replied by Dick Witcher on topic Renaissance Jam on Sale Registration
    Always put the key arm comb back on when operating these machines. Things have a tendencie to move around & jam on other parts, Release the current jam by holding the anti back up pawl & pull up on the key. If all fails remove the counter Or check the printer. Good luck Dick.
    I have a repair DVD set available plus books.
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Please Log in to join the conversation.

    1 week 3 days ago #5747 by magpies35

  • New Member
  • New Member

  • Posts: 7
  • Thank you received:

  • Replied by magpies35 on topic Renaissance Jam on Sale Registration
    Hi Dick,

    Putting the key comb back on fixed the problem, thanks!

    Matt

    Please Log in to join the conversation.

    Powered by Kunena Forum