file NCR 6000

1 month 3 days ago #6187 by jsebastian

  • New Member
  • New Member

  • Posts: 3
  • Thank you received:

  • Gender: Unknown
  • Birthdate: Unknown
  • NCR 6000 was created by jsebastian
    Hello,
    I recently finished a refurbishment of an NCR 6000 series. Picture attached. It was mostly cleaning, lubricating and painting. The machine works but the subtotal/total function, activated by the lever, does not work. It always reads “Total 0.00". I was wondering if anyone might have an idea as to what might be a solution. Also, does anyone have a repair manual for the 6000 series for sale?

    Thank you for your time,

    John, Escondido, CA
    Attachments:

    Please Log in to join the conversation.

    1 month 14 hours ago #6201 by Vintagepos

  • Premium Member
  • Premium Member

  • Posts: 116
  • Thank you received: 29

  • Gender: Male
  • Birthdate: 29 Dec 1942
  • Replied by Vintagepos on topic NCR 6000
    The counter wheels are gummed up , the zero stops on keyboard may not be releasing . Is the machine doing a double cycle?
    The following user(s) said Thank You: jsebastian

    Please Log in to join the conversation.

    1 week 4 days ago - 1 week 4 days ago #6216 by jsebastian

  • New Member
  • New Member

  • Posts: 3
  • Thank you received:

  • Gender: Unknown
  • Birthdate: Unknown
  • Replied by jsebastian on topic NCR 6000
    When you say counter wheels, I assume you mean the display, which on this machine are flags that move up and down, unless I am not understanding. Are you referring to the geared wheels which rotate to activate the particular flags raising?

    Yes, the machine will do double cycles in the add position after I try to do a total but If I fiddle with the levers atop the large gear in the picture, it will go back to single cycle. If I try total again, I goes back to double cycle. I enjoy fixing things but I don't really know what I am doing.

    Thank you for your help on this!
     
    Attachments:

    Please Log in to join the conversation.

    Powered by Kunena Forum