file Dust Cover Glass needed

10 months 2 weeks ago - 10 months 2 weeks ago #5800 by Paul Marcuzzo
  • Paul Marcuzzo
  • [GunnerCG20]
  • Paul Marcuzzo's Avatar Topic Author
  • Offline


  • Posts: 29
  • Thank you received:

  • Dust Cover Glass needed was created by Paul Marcuzzo
    I am actually making progress resurrecting my Model 39, thanks mostly to Dick Witcher & his videos. I am in need of a "Customer Count, Quart, Pint" dust cover glass. If anybody has one stuck in a drawer some place and would like to part with it I would greatly appreciate it. That is my final missing part. Thank you!

    Please Log in to join the conversation.

    10 months 5 days ago #5835 by Paul Marcuzzo
    • Paul Marcuzzo
    • [GunnerCG20]
    • Paul Marcuzzo's Avatar Topic Author
    • Offline


  • Posts: 29
  • Thank you received:

  • Replied by Paul Marcuzzo on topic Dust Cover Glass needed
    Not having any luck locating this little guy. I am going to try making my own glass, our local library has a laser engraver that will cut glass. Could somebody tell me the dimensions of the glass for the triple window counter? Thank you!

    Please Log in to join the conversation.

    10 months 5 days ago #5836 by Bob Depenbrok


  • Posts: 363
  • Thank you received: 54

  • Replied by Bob Depenbrok on topic Dust Cover Glass needed
    measure the inside of the dust cover.. You need half strength glass, very thin.
    The following user(s) said Thank You: Paul Marcuzzo

    Please Log in to join the conversation.

    5 months 2 weeks ago #6140 by Paul Marcuzzo
    • Paul Marcuzzo
    • [GunnerCG20]
    • Paul Marcuzzo's Avatar Topic Author
    • Offline


  • Posts: 29
  • Thank you received:

  • Replied by Paul Marcuzzo on topic Dust Cover Glass needed
    Finally getting my Model 39 together, the last piece I need is this darn etch glass, any chance anybody has come across one?

    Please Log in to join the conversation.

    5 months 2 weeks ago #6141 by Bob Depenbrok


  • Posts: 363
  • Thank you received: 54

  • Replied by Bob Depenbrok on topic Dust Cover Glass needed
    I probably have one. which glass?
    This email address is being protected from spambots. You need JavaScript enabled to view it.

    Please Log in to join the conversation.

    5 months 1 week ago #6152 by Paul Marcuzzo
    • Paul Marcuzzo
    • [GunnerCG20]
    • Paul Marcuzzo's Avatar Topic Author
    • Offline


  • Posts: 29
  • Thank you received:

  • Replied by Paul Marcuzzo on topic Dust Cover Glass needed
    I think you looked before, I need "Customer Count, Quart, Pint" I am trying to avoid making one and would prefer an original one. Thanks for looking!

    Please Log in to join the conversation.

    Powered by Kunena Forum