Parts for Model 452 - 2C

2 years 5 months ago #1967 by JDyall


  • Posts: 11

  • Gender: Unknown
  • Birthdate: Unknown
  • Parts for Model 452 - 2C was created by JDyall
    I have a 452 2-C double drawer (drawers one above the other) which is missing some parts of the drawer opening mechanism. Can anyone help me to find

    1. The #3 Gear and spline key
    2. Drawer Plunger Pitman

    Grateful thanks in advance for any help you can give!

    John Dyall
    The following user(s) said Thank You: ncrebay

    Please Log in to join the conversation.

    2 years 5 months ago #1968 by NAV


  • Posts: 671

  • Gender: Unknown
  • Birthdate: Unknown
  • Replied by NAV on topic Parts for Model 452 - 2C
    I am going to scrap a 542 -E mechanism and four drawer wood base (2 + 2). You or anyone else is welcome to it. Also, have most of the brass case, but that will be getting scrapped for the $2.00 a pound or so it will bring.
    The following user(s) said Thank You: ncrebay, JDyall

    Please Log in to join the conversation.

    2 years 5 months ago #1969 by dep


  • Posts: 239

  • Gender: Male
  • Birthdate: 19 Jul 1948
  • Replied by dep on topic Parts for Model 452 - 2C
    John I have everything you asked for except the exact/correct lifter pitman arm. We need one which has a 90 degree bend at the bottom of it to fit over the finger shaft (drawer dialer). and it held in place with a washer and cotter pin. then it lifted the shaft to open the different drawers
    bob dep
    The following user(s) said Thank You: ncrebay, JDyall

    Please Log in to join the conversation.

    2 years 5 months ago #1971 by dep


  • Posts: 239

  • Gender: Male
  • Birthdate: 19 Jul 1948
  • Replied by dep on topic Parts for Model 452 - 2C
    Nav--was this a 452-4c?
    bob dep
    The following user(s) said Thank You: ncrebay

    Please Log in to join the conversation.

    2 years 5 months ago #1972 by JDyall


  • Posts: 11

  • Gender: Unknown
  • Birthdate: Unknown
  • Replied by JDyall on topic Parts for Model 452 - 2C
    Many thanks Bob - I will email you.

    John
    The following user(s) said Thank You: ncrebay

    Please Log in to join the conversation.

    2 years 5 months ago #1973 by NAV


  • Posts: 671

  • Gender: Unknown
  • Birthdate: Unknown
  • Replied by NAV on topic Parts for Model 452 - 2C
    Yes, a 542-4-C. The wood base is the second hand mahogany base.
    The following user(s) said Thank You: ncrebay

    Please Log in to join the conversation.

    2 years 5 months ago #1974 by JDyall


  • Posts: 11

  • Gender: Unknown
  • Birthdate: Unknown
  • Replied by JDyall on topic Parts for Model 452 - 2C
    Grateful thanks to all who have replied. With your help I now have found what I need. Your help is much appreciated.

    John

    Please Log in to join the conversation.

    Powered by Kunena Forum