Model 250 and 50 parts PARTS FOUND

  • poolmandoug
  • poolmandoug's Avatar Topic Author
  • Offline
  • New Member
More
11 months 5 hours ago - 10 months 4 weeks ago #3127 by poolmandoug
poolmandoug created the topic: Model 250 and 50 parts PARTS FOUND
I have attached a photo a 250 drawer that dismissing the back hardware and spring. I am looking for these parts. I would also like to see a picture of the back of a complete 250 drawer if anyone wouldn't mind posting one. Need the red flash for this machine as well. Is the 250 red flash the same as a 313?

I also am looking for a Model 50 red brass Renaissance breast plate.

Please email me if you have any of these items for sale.

Thank you

Doug
Attachments:

Please Log in to join the conversation.

More
11 months 4 hours ago #3128 by rvkapp1
rvkapp1 replied the topic: Model 250 and 50 parts
I believe all the drawer hardware is the same on a 250 as a 313. The flash should be the same also.

Please Log in to join the conversation.

More
10 months 4 weeks ago #3129 by Dick Witcher
Dick Witcher replied the topic: Model 250 and 50 parts
I have red flashes from the 711's which are the same except for the shouldered guide scews. These can be ground dowh & a screwdricer slot put in the end.
Dick

Please Log in to join the conversation.

More
10 months 4 weeks ago #3130 by dep
dep replied the topic: Model 250 and 50 parts
711 red flashes have a longer side rail than 313's.. they sit up too high on a 313/250
the 711 shoulder screws are 8/32.. the 250/313 shoulder screws are 6/32 thread.
Bob Depenbrok
vintage cash register

Please Log in to join the conversation.

  • poolmandoug
  • poolmandoug's Avatar Topic Author
  • Offline
  • New Member
More
10 months 4 weeks ago #3131 by poolmandoug
poolmandoug replied the topic: Model 250 and 50 parts
I have found some parts. Thank you all for your helpful input.

Doug

Please Log in to join the conversation.

Powered by Kunena Forum