file Flag springs & Rivets.

2 years 1 month ago #4627 by Jack Perri

  • New Member
  • New Member

  • Posts: 7
  • Thank you received:

  • Flag springs & Rivets. was created by Jack Perri
    Where is a good place to purchase flag springs? I'd like to replace all on my 332 NCR. What rivets are good replacements for the flag surround(if that's what its called) Thanks. Joining this club is money well spent for information.I'm very thankful for all the help.

    Please Log in to join the conversation.

    2 years 1 month ago #4628 by thcashregister@msn.com

  • over 160 Posts
  • over 160 Posts

  • Posts: 277
  • Thank you received: 51

  • Replied by thcashregister@msn.com on topic Flag springs & Rivets.
    Call Bob Dep. at the vintage cash register and scale company.
    Rick
    The following user(s) said Thank You: Jack Perri

    Please Log in to join the conversation.

    2 years 1 month ago #4629 by mike novak

  • over 160 Posts
  • over 160 Posts

  • Posts: 228
  • Thank you received: 31

  • Replied by mike novak on topic Flag springs & Rivets.
    Hi If Bob don`t have any springs I have some new ones.
    The following user(s) said Thank You: Jack Perri

    Please Log in to join the conversation.

    2 years 1 month ago #4630 by The Collector

  • over 320 Posts
  • over 320 Posts

  • Posts: 484
  • Thank you received: 80

  • Replied by The Collector on topic Flag springs & Rivets.
    I used to buy them at my local Sears Hardware store. Unfortunately all the stores in my area have closed.

    Please Log in to join the conversation.

    2 years 1 month ago #4632 by NAV

  • Moderator
  • Moderator

  • Posts: 924
  • Thank you received: 148

  • Replied by NAV on topic Flag springs & Rivets.
    I use flag springs from parts machine registers. Easier than trying to locate specific items. I do a lot of non NCR registers and the flags are thinner than those used on Nationals, so I had some indication flags water cut at a machine shop. I go to the local ACE & True Value Hardware Store and purchase small tinner rivets. Try any OLD hardware store for these kind of rivets and springs.

    Attachments:
    The following user(s) said Thank You: GunnerCG20, Jack Perri

    Please Log in to join the conversation.

    Powered by Kunena Forum